Brass Flare Nut

Name: Brass Flare Nut
Brand: ST

Heavy duty forged brass flare nut for connecting copper refrigeration tubing to air conditioning compressor valves and split units.

Brass fittings and valves like this connect copper refrigerant lines and water lines where a leak-tight, corrosion-resistant joint matters — split-unit AC installs, chiller plant rooms, and domestic water systems across Kuwait all specify brass over cheaper alternatives for exactly this reason. Kuwait's heat and humidity make corrosion resistance a real, not theoretical, requirement, and a refrigerant joint in particular has to hold pressure reliably for years without a slow leak that quietly drains a system's charge. Technicians typically keep a small stock of common sizes on the service van rather than sourcing them per job.

On the spec sheet: Material: Forged Brass C37700, Standard: SAE J513, Available Sizes: 1/4", 3/8", 1/2", 5/8", and Pressure Rating: Up to 700 PSI (R410A/R32 Compatible). Call or WhatsApp our Shuwaikh counter to check current stock before you plan a site visit around it — for items with several close variants, it's faster to confirm by phone than to guess from a photo alone, and it saves a wasted trip if we're temporarily out of one size. If you're not certain which size or variant matches what you're replacing, send us a photo or the old part's markings and we'll confirm the right one before you order.

Super Tech supplies Hardware in trade quantities from Shuwaikh Industrial Area, with delivery available across Kuwait, pricing that scales for bulk orders, and staff who can confirm the right size for your application before you buy. We ship to job sites, workshops, and offices anywhere in Kuwait — Shuwaikh, Kuwait City, Hawalli, Salmiya, Farwaniya, Ahmadi, Jahra, and Fahaheel are all on our regular delivery routes, and same-day collection is available if you're already in Shuwaikh Industrial Area. Mention "Brass Flare Nut" when you reach out and we'll confirm stock for that specific item.

Hardware items like this are checked for size and finish before they go out, since a mismatched fastener or fitting is often only discovered once it's already needed on site. We keep enough volume in common sizes that a repeat trade order doesn't run into a stock gap. Ask specifically for the Brass Flare Nut when you call or WhatsApp so we can check that exact item rather than a similar one.

Select Size / Specification Option:

Or call us directly: +965 65061752

Specifications

Material	Forged Brass C37700
Standard	SAE J513
Available Sizes	1/4", 3/8", 1/2", 5/8"
Pressure Rating	Up to 700 PSI (R410A/R32 Compatible)

Related Products

Swipe or drag to explore related products

Fischer EA II Heavy Duty Drop-In Anchor Box

Fischer EA II internal thread steel drop-in anchor set for heavy pipe suspension, unistrut channels, and concrete ceiling fixings. MEP crews use anchors like this whenever a fixture has to hang from concrete rather than a stud wall — suspended ductwork, cable tray, chiller piping, or unistrut framing bolted into a slab or ceiling soffit. In Kuwait's mostly reinforced-concrete building stock, a rated concrete anchor is the default fixing method on almost every mechanical and electrical first-fix, and site inspectors routinely check that the anchor size and embedment depth match the load being hung. Getting the anchor spec right the first time avoids a costly rework once ceiling tiles or finishes have already gone in above it. On the spec sheet: Brand: Fischer, Material: Zinc-Plated Carbon Steel, Sizes: M6, M8, M10, M12, M16, and Application: Concrete ceiling & MEP channel anchoring. As a genuine Fischer product, it carries the fit and finish that brand's other parts are known for, rather than an unbranded substitute — worth asking about if you're standardising a project's materials on a single manufacturer for warranty or spec-compliance reasons. If you're not certain which size or variant matches what you're replacing, send us a photo or the old part's markings and we'll confirm the right one before you order. This item is part of our Hardware range, held in stock in Shuwaikh for contractors and workshops who can't afford to wait on a back-order — call or WhatsApp us to confirm quantity and pricing for your project. We ship to job sites, workshops, and offices anywhere in Kuwait — Shuwaikh, Kuwait City, Hawalli, Salmiya, Farwaniya, Ahmadi, Jahra, and Fahaheel are all on our regular delivery routes, and same-day collection is available if you're already in Shuwaikh Industrial Area. Mention "Fischer EA II Heavy Duty Drop-In Anchor Box" when you reach out and we'll confirm stock for that specific item. Hardware items like this are checked for size and finish before they go out, since a mismatched fastener or fitting is often only discovered once it's already needed on site. We keep enough volume in common sizes that a repeat trade order doesn't run into a stock gap. Ask specifically for the Fischer EA II Heavy Duty Drop-In Anchor Box when you call or WhatsApp so we can check that exact item rather than a similar one.

View Product

GI Hex Bolt, Nut & Washer Set

GI (Galvanized Iron) Hex Bolt, Nut, and Washer Set is a comprehensive fastening assembly engineered for high durability and superior corrosion resistance. The components are manufactured from mild steel or carbon steel and coated with a layer of zinc (galvanization), which acts as a sacrificial anode to prevent rusting in harsh environments. Fasteners and threaded fittings like this move in volume on Kuwait construction and MEP sites because nearly every trade — plumbing, HVAC, structural, and general fit-out — needs a reliable source for them, and running out mid-installation stalls a whole crew rather than just one task. Site buyers typically order by the box for exactly this reason, keeping a working reserve on the truck or in the site store rather than sourcing piece by piece as the job progresses. On the spec sheet: Material: Galvanized Carbon Steel, and Sizes: Up to 12mm (M6, M8, M10, M12). Call or WhatsApp our Shuwaikh counter to check current stock before you plan a site visit around it — for items with several close variants, it's faster to confirm by phone than to guess from a photo alone, and it saves a wasted trip if we're temporarily out of one size. If you're not certain which size or variant matches what you're replacing, send us a photo or the old part's markings and we'll confirm the right one before you order. This item is part of our Hardware range, held in stock in Shuwaikh for contractors and workshops who can't afford to wait on a back-order — call or WhatsApp us to confirm quantity and pricing for your project. We ship to job sites, workshops, and offices anywhere in Kuwait — Shuwaikh, Kuwait City, Hawalli, Salmiya, Farwaniya, Ahmadi, Jahra, and Fahaheel are all on our regular delivery routes, and same-day collection is available if you're already in Shuwaikh Industrial Area. Mention "GI Hex Bolt, Nut & Washer Set" when you reach out and we'll confirm stock for that specific item. Hardware items like this are checked for size and finish before they go out, since a mismatched fastener or fitting is often only discovered once it's already needed on site. We keep enough volume in common sizes that a repeat trade order doesn't run into a stock gap. Ask specifically for the GI Hex Bolt, Nut & Washer Set when you call or WhatsApp so we can check that exact item rather than a similar one.

View Product

Aluminium Flat Head Rivets

Precision-engineered aluminium blind pop rivets featuring high-strength steel mandrels. Ideal for fast, permanent mechanical joining of sheet metal ductwork, aluminum cladding, and ventilation duct flanges. Sheet-metal ductwork fabricators and installers in Kuwait use fasteners like this to join duct sections and flanges quickly on site, where speed matters as much as strength once a crew is working against a project handover date. A consistent, properly sized fastener across a whole duct run also keeps the finished ductwork airtight, which matters directly for the system's energy efficiency once it's commissioned and running in Kuwait's summer load conditions. On the spec sheet: Origin: India, Sizes: 4x8mm, 4x10mm, 4x12mm, 5x12mm, Mandrel: Zinc-Plated Carbon Steel, Packaging: 1000 pcs per box, and Body Material: High-Purity Aluminium Alloy. It's typically supplied 1000 pcs per box, which is worth knowing before you calculate how many units your project actually needs. If you're not certain which size or variant matches what you're replacing, send us a photo or the old part's markings and we'll confirm the right one before you order. Super Tech supplies Hardware in trade quantities from Shuwaikh Industrial Area, with delivery available across Kuwait, pricing that scales for bulk orders, and staff who can confirm the right size for your application before you buy. We ship to job sites, workshops, and offices anywhere in Kuwait — Shuwaikh, Kuwait City, Hawalli, Salmiya, Farwaniya, Ahmadi, Jahra, and Fahaheel are all on our regular delivery routes, and same-day collection is available if you're already in Shuwaikh Industrial Area. Mention "Aluminium Flat Head Rivets" when you reach out and we'll confirm stock for that specific item. Hardware items like this are checked for size and finish before they go out, since a mismatched fastener or fitting is often only discovered once it's already needed on site. We keep enough volume in common sizes that a repeat trade order doesn't run into a stock gap. Ask specifically for the Aluminium Flat Head Rivets when you call or WhatsApp so we can check that exact item rather than a similar one.

View Product

Denso Tape

Denso Tape is a cold-applied, multi-purpose anti-corrosion petrolatum tape, widely used to seal and protect buried or exposed steel pipes, flanges, valves, rods, and couplings from moisture, salts, and chemical corrosion. Invented by Winn & Coales (Denso), it consists of a non-woven synthetic fibre fabric carrier fully impregnated and heavily coated with a neutral petrolatum compound and inert siliceous fillers. Fasteners and threaded fittings like this move in volume on Kuwait construction and MEP sites because nearly every trade — plumbing, HVAC, structural, and general fit-out — needs a reliable source for them, and running out mid-installation stalls a whole crew rather than just one task. Site buyers typically order by the box for exactly this reason, keeping a working reserve on the truck or in the site store rather than sourcing piece by piece as the job progresses. On the spec sheet: Material: Petrolatum-based protective tape, Application: HVAC, plumbing, pipelines and underground piping, and Used For: Protecting metal pipes, joints, fittings and surfaces from corrosion. Call or WhatsApp our Shuwaikh counter to check current stock before you plan a site visit around it — for items with several close variants, it's faster to confirm by phone than to guess from a photo alone, and it saves a wasted trip if we're temporarily out of one size. If you're not certain which size or variant matches what you're replacing, send us a photo or the old part's markings and we'll confirm the right one before you order. Super Tech supplies Hardware in trade quantities from Shuwaikh Industrial Area, with delivery available across Kuwait, pricing that scales for bulk orders, and staff who can confirm the right size for your application before you buy. We ship to job sites, workshops, and offices anywhere in Kuwait — Shuwaikh, Kuwait City, Hawalli, Salmiya, Farwaniya, Ahmadi, Jahra, and Fahaheel are all on our regular delivery routes, and same-day collection is available if you're already in Shuwaikh Industrial Area. Mention "Denso Tape" when you reach out and we'll confirm stock for that specific item. Hardware items like this are checked for size and finish before they go out, since a mismatched fastener or fitting is often only discovered once it's already needed on site. We keep enough volume in common sizes that a repeat trade order doesn't run into a stock gap. Ask specifically for the Denso Tape when you call or WhatsApp so we can check that exact item rather than a similar one.

View Product